Kverneland Exacta TLX GEOSPREAD

Vysokorýchlostné rozmetanie za každých okolností.

Rozmetanie vysokou rýchlosťou

Kverneland Exacta TLX GEOSPREAD má takmer úplne rovnaké technické parametre ako Exacta TL GEOSPREAD, prichádza však s novo navrhnutým systémom CentreFlow s 8 lopatkami na každom disku pre dokonalé prekrytie bez ohľadu na to, ako rýchlo jazdíte. Vďaka sekciám s dĺžkou 1 meter, 4 váhovým a referenčnému snímaču dokáže Kverneland Exacta TLX GEOSPREAD rozmetať vysokou rýchlosťou v akýchkoľvek podmienkach. Rozmetadlo Exacta TLX GEOSPREAD je ISOBUS kompatibilné a certifikované AEF. Rozmetadlo môžete ovládať s IsoMatch Tellus PRO, IsoMatch Tellus GO+ alebo iným ISOBUS kompatibilným terminálom v traktore.

Výhody

  • Rozmetací systém CentreFlow
  • Plne automatický systém váženia s jedinečným referenčným senzorom
  • Unikátny systém GEOSPREAD s dvomi elektrickými ovládačmi
  • ISOBUS 11783 kompatibilná technológia jednoduchého pripojenia „Plug and Play“
  • Možná kombinácia s IsoMatch GEOCONTROL
  • MULTIRATE na aplikáciu rôznych dávok v pracovnej šírke

Technické údaje

Exacta TLX GEOSPREAD TLX GEOSPREAD 1875 TLX GEOSPREAD 2550 TLX GEOSPREAD 3225 TLX GEOSPREAD 3900
Kapacita násypky (l) 1875 2550 3225 3900
Plniaca výška 123 142 161 180
Šírka (cm) 290
Plniaca šírka (cm) 284
Váha bez hnojiva (kg) 690 720 750 780
Šírka rozmetania (m) 24 - 45*
Výstupná dávka (kg/min) 10 - 540

* V závislosti od typu lopatiek a hnojiva.

GEOSPREAD Systém

Pri spustení IsoMatch GEOCONTROL okrem GEOSPREAD môžete presnejšie nastaviť Exacta CL, TL a TLX GEOSPREAD. Pracovný záber sa pomocou polohovacieho systému GPS automaticky upraví tak, aby vyhovovala prekrytiu a pokrytiu. Napríklad pri jazde v teréne alebo v poli nepravidelného tvaru začne GEOSPREAD postupne zmenšovať pracovný záber. GEOSPREAD používa funkciu ovládania sekcií softvéru IsoMatch GEOCONTROL, ktorý je v termináli IsoMatch Tellus PRO alebo IsoMatch Tellus GO. Pracovný záber rozmetadla je rozdelený na minimálne 1 metrové úseky (max. 45 úsekov na TLX GEOSPREAD, max. 54 úsekov na TL GEOSPREAD a max. 33 úsekov na CL GEOSPREAD). Nastavuje sa nielen šírka rozmetania, ale automaticky sa upravuje aj aplikačná dávka (kg / min) tak, aby zodpovedala upravenej šírke rozmetania. Vďaka tejto jedinečnej kombinácii pracovného záberu a nastavenia aplikačnej dávky je systém GEOSPREAD mimoriadne presný s minimálnym vplyvom na variačný koeficient rozmetania.

Výhody:

  • Rýchle a presné rozmetanie vďaka priamemu spojeniu pohonov s miestom výpadu. 
  • Stabilné otáčky disku v kombinácii s nastavením bodu vypúšťania udržujú rozmetávací vzorec (variačný koeficient)
  • Ovládanie sekcii s veľkosťou 1m (v závislosti od funkčnosti terminálu)
  • Ľahká obsluha; pre nastavenie pracovnej šírky nie je potrebné vystupovať z traktora
  • 100% ISOBUS kompatibilné pre ľahkú obsluhu
  • Automatické spustenie / zastavenie s GPS na úvrati

MULTIRATE

For easy and cost effective spreading

MULTIRATE (Variable Rate Application) applies multiple rates within a working width.

In order to spread the right amount of fertiliser at a specific place in a field there is a need to have a different rate within the working width. Depending on the field variation and the size of the grid of the variable application map, input of 2, 4, 6 or 8 rate sections can be used. This means a more accurate application of nutrients to have a better nutrient efficiency, better yield and reduce costs.

With a Kverneland GEOSPREAD spreader you invest in 100% ISOBUS compatibility for easy plug and play with the IsoMatch Tellus PRO or any other AEF certified terminal. In just some steps with this combination you are ready to use MULTIRATE. You have to convert a satellite or soil map into an ISO-XML file. Download the Variable Rate Map into the terminal and you are ready to spread with MULTIRATE with 2 up to 8 rates.

High Speed CentreFlow system

With the High speed CentreFlow system, fertiliser is gently brought up to speed in the dosing cup, before it is released on the disc. This system is unique compared to most other spreading systems that have the fertiliser falling on the disc. Therefore the High speed CentreFlow system has some important advantages:

  • No impact, so no fragmentation. Spreading pattern is not affected by damaged fertiliser.
  • 8 vanes per disc instead of 2. With 8 vanes fertiliser is released on a high frequency for a very constant flow and even spreading pattern, which is especially important when driving higher speeds and spreading larger quantities. 
  • Accurate spreading in hilly conditions. An inclination of the spreader does not affect the release point of the fertiliser on the disc and from the vane.

Weighing System

  • Continuous dynamic "online - calibration" with high frequency communication signal.
  • Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
  • Load cells in combination with the unique reference sensor:
    - Auto calibrating and continuous weighing system
    - Automatic correction on slopes
    - Automatic correction of shocks, even on rough terrain
    - Automatic speed related dosing system
    - No calibration test needed
  • Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality! 

EasySet: Easy Setting and Adjustment

  • The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of application rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
  • The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
  • The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The Kverneland Exacta checklist helps you to ensure consistent accuracy in all field conditions
    1. Select fertiliser type
    2. Determine granule size and distribution
    3. Determine litre weight

Border Spreading

  • Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the HL, TL and TLX models the ExactLine can even be fitted on the left and right hand side of the spreader.
  • With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
  • With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
  • The Border Spreading Indicator (BSI), indicates which border spreading device is active.

AutosetApp

With the AutosetApp you have always the most up to date settings for your weighing spreader available. The AutosetApp is an App (software application) available on the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal. The AutosetApp is standard integrated into the IsoMatch GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.

The Kverneland fertiliser spreader database with the most up to date spreading charts is always available online. The AutosetApp can connect to the fertiliser spreading database in two different ways. You can connect it to the online database via the IsoMatch Wireless WIFI USB adapter or download the most actual database from the website www.kvernelandspreadingcharts.com on an USB stick and upload the database directly into the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal.

Standard and Optional Equipment

  • The Exacta HL/TL(X) spreaders are also available mounted on a trailer frame.
  • Central Hydraulic Drive as option available for the HL/TL(GEOSPREAD).
  • Easy to assemble aluminium hopper extensions are available to increase hopper capacity.
  • An easy to fold in and out hopper cover is as option available. Simple to fit! This can be the manual hopper cover or with the electrical version controlled via the tractor cab.
  • Left/right shut off valve for spreading at half working widths is optional available.
  • To ensure a consistent flow when spreading low quantities, the CentreFlow system is equipped with a fine application kit. Ideal for spreading low quantities, seeds and slug pellets.
  • Delta shaped heavy duty grids are standard equipment of the Exacta HL/TL(X) spreader.
  • Centre gear box with 2 input shafts for high and low disc speed settings is standard equipment of the HL/TL(X) spreader.
  • Hopper emptying kit is optional available to easy get the last fertiliser out of your hopper.
  • Easy calibration is done with the optional calibration container.
  • Long lifetime LED lighting set, is optional for the EL, CL and CL-EW. For the HL, TL and TL(X) GEOSPREAD spreader is this standard equipment.
  • The mud guards (option) protect the spreading disc against mud, water etc.